Peel-a-way Sockets and Pins

Peel-a-way Sockets and Pins for your Elite-C and pro-micros

1 unit is 1 strip of 12 socket or 12 pins mounted in a peel-a-way sheet

How low can we go?

These Peel-a-way pin sockets are the lowest way to mount your pro-micros or Elite-C to your hobby boards.

Sockets

• ship as a strip of 12 sockets
• perfect for 1 side of your pro-micro, Elite-C, or Pluto
  
• will require 2 strips to mount a pro-micro 
• can be cut in strips of 2 to hotswap some LEDs with thinner legs
• outer plating tin/lead
• inner plating gold
• 3.94mm total length with a 0.38mm lip and 0.86mm diameter

Pins

• ship as a strip of 12 pins
• mate perfectly with the sockets detailed above
• will require 2 strips to mount a pro-micro
• can be used to mount microcontroller direct to pcb without sockets but would not be removable without desoldering 
• have a mid-plate design to avoid solder running into socket below

Instructions:

1. Set the sockets into the pcb and solder from opposite side of pro-micro mounting 
   
2. Place pins into sockets and line up micro on top of pins
3. Gently and evenly push micro down setting the pins into the sockets.
4. Solder to pins

Alternate instructions for pins alone mounting:

1. Set strip of pins into same side of pcb for pro-micro mount and solder from opposite side
2. Place micro on top of pins and solder to pins

Caution compatibility with some boards by Japanese designers.

Not for mill-maxing switches.